ACER ASPIRE 4310 for WINDOWS XP

Whew! Finally! Acer releases a official drivers on Acer Aspire 4310 for Windows XP.
We don't have to worry about incompatible drivers.


http://support.acer-euro.com/drivers/notebook/as_4310.html


For all Acer Aspire 4310 users out there here's the instructions and download link of the driver compatible for windows XP.

SATA RAID Driver
http://rapidshare.com/files/42244341/SATA_Raid.rar.html

How to make sata driver for Aspire 4310

1. Extract SATA_Raid.rar then copy all extracted files to Floppydisk

2. XP installation SOP:
2.1 Put the WinXP SP2 CD disc to DVD-ROM.
2.2 Plug in USB Floppy with AHCI driver disk to system USB port. (*a)
2.3 Power on system and press “F2” key to enter BIOS.
2.4 Set boot priority 1: CD/DVD 2: IDE0 3: USB FDD then restart.
2.5 System starts installation.
2.6 Please press “F6 key” for several times while you see the “Press F6 if you…….” is displayed below the screen.
2.7 After about 3~4 minute, the system appear “Windows Setup”screen.
2.8 Press “S key” , then select “Intel 82801GM SATA RAID CONTROLLER (MOBILE ICH7MR/DH)".
2.9 The system will load AHCI driver through the USB floppy disc, then press “Enter key”.
2.10 The system can identify the SATA HDD and start installation successfully, check the system without appear bluescreen.

These drivers are also compatible to Windows XP.

VGA Driver
http://support.acer-euro.com/drivers...k/tm_3270.html
then select "VGA Driver Intel 6.14.10.4543"

Audio Driver
http://support.acer-euro.com/drivers...k/tm_3270.html
then select "Audio Driver 5.10.0.5273"

Wireless Adapter Driver
http://support.acer-euro.com/drivers...k/tm_3270.html
then select "Wireless Lan Driver 802bg Broadcom Ver.4.100.15.5V4.0"

The following drivers of the Resource CD are compatible to windows XP: AHCI, Chipset, LAN, Touchpad, Card Reader and Modem.